Translations:DLC CD 163/32/en

Locomotive Cold start procedure

1. Switch on the batteries   2. Open the pantograph shut-off valves 3. Activate the cab   4. Switch on the auxiliary compressor (set compressor switch 1 to the PK position)   Wait for the auxiliary compressor to switch off automatically   5. Switch on the 115 V central power supply   6. Use the Override Protection button 7. Set the collector grounding switch to the P+Z position if there is no collector malfunction on the locomotive 8. Turn on the main switch (HV) 9. Raise the pantographs 10. Switch on compressor 2   Wait until the pressure in the main reservoir reaches 5 bar 11. Switch off the auxiliary compressor and switch on compressor 1   Wait for the compressors to switch off automatically 12. Turn on the radio 1e. Apply the auxiliary (locomotive) brake 14. Release the train brake and fill the main pipe 15. Release the hand brakes   16. Adjust the lights 17. Set the direction of travel to forward The locomotive is ready to move. Instructions taken from the TSC game and may differ slightly in the game, will be corrected. Author of instructions: Maty