Locomotora eléctrica E186 Traxx

From SimRail Wiki
Revision as of 20:23, 24 March 2023 by Jmluengor (talk | contribs) (He traducido la página escrita en inglés)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The following article is about the E186 Traxx electric locomotive.

186.272-1 in Czechowice-Dziedzice Poludniowe Author Vitek Scheffczik (Bata)

Locomotive in reality

Bombardier TRAXX is the name of a family of electric and diesel locomotives manufactured by Bombardier Transportation (or formerly Adtranz) in many modifications. The locomotives are assembled at the company's plants in Kassel and Vado Ligure [1].

In-game locomotive

Traxx, Screenshot by Matěj732

This electric locomotive in the game was added in the Prologue version, and players can run this locomotive as part of freight trains.

Serial numbers of locomotives that can be driven:

  • E186-134
Basic parameters of this locomotive
  • Maximum speed 140 Km/h

Interior of the locomotive

traxx packy1.jpg
1. Battery
2. Light mode
3. Activate spring brake
3a. Release spring brake
4. Windsreen heating
5. LZB active
6. Windsreen heating
7. n/a
8. n/a
traxx packy2.jpg
9. Emergency brake 18. LZB alerter
10. n/a 19. Sanding
11. n/a 20. Horn
12. Radiostop 21. Light dimming
13. Radio power switch 22. Instrument lighting
14. Channel +- 23. Cab lighting
15. ZEW buttons 24. Cruise control handle
16. LZB command 25. Drive handle
17. Release LZB 26. Direction
traxx packy3.jpg
27. Brake releaser 35. Open doors
28. Wiper 36. Local brake
29. Washer 37. Emergency brake
30. Windscreen heating 38. Vigilance button
31. Service brake 39. LZB command / alerter
32. Electric bus 40. Unlock side panel
33. Main switch 41. Shunting handle
34. Pantographs 42. Emergency brake

Cold start procedure

1.Move the switch (on the rear wall of the cabin) to the right position.

2.Press "Space" to confirm the alerts.

3.Raise pantographs, wait for a while to close the main circuit.

4.After you hear the engine's noise, push the direction "forward" button.

5.Push the service brake handle to the "fill" position, don't release your hand until it shows 0% of force.

6.Turn on the radio, follow the instructions to complete brake test.

7.Release the spring brake (on the rear wall of the cabin), and set your light type.

Note: If you're in single player mode, please press ZEW3 to contact with dispatchers.

Locomotive faults

The locomotive is currently free of any faults.

About the Handles

The handles in the game are basically worked like this: 

A picture of description on handles for TRAXX
A picture to tell you the positions and default settings of TRAXX handle in the game.

Gallery

Reference

  • [1] - Wikipedia link