Translations:Elektrická lokomotiva ET25/11/en

1. We enter the cabin
2. Activating the cabin
3. Press the button to confirm alertness
4. Raise rear manifold
5. Turn on the HV switch and hold the button for a moment.
6. Turn on the radio station
7. Now, switch off the locomotive handbrake, where the button is located on the rear wall of the cab.
8. Switch the lights to the forward position.
9. Set the train's direction of travel - Forward
10. Switch and hold the brake in the "Reduce braking force" position and wait until the braking force is at 0%.
    • Click ZEW3 button on the radio to confirm the train is ready to the dispatcher.
11. Now it's time to move. Either use the controller (left) or the Num + key to add power.
12. Using the Num - key or reducing power on the controller will reduce the locomotive power and then we can brake the train or apply the electrodynamic brake.