Translations:Elektrická jednotka Pendolino/11/en

1. Click on the door and select the option to open the door.
2. Then enter the unit.
3. Click the left mouse button and close the door.
4. On the panel, turn on the batteries, the car lights and select the lights.
5. Click on the driver's seat, sit behind the console.
6. Now, activate the cab
7. Confirm vigilance button
8. Raise the rear pick-up
9. Turn on the control circuits
10. Turn on HV (main switch)
    • Now wait for the panel to read "12A"
    • Confirm to the dispatcher that the train is ready by pressing the ZEW3 button on the radio.
11. Set the train direction - Forward
12. Move the brake lever to the "Running" position and wait for the train to unbraking (Brake force must be 0%)
13. Switch off the spring brake
14. Now it's time to move. Either use the controller (right) or the Num + key to add power.
    • At the stations we must not forget the possibility of opening the passenger door, which is visible at 04:26
    • Press the open left door button and let the passengers board the train.
    • After the passengers have finished boarding, we press the door lock button and we can leave the station.