Pendolino electric unit

From SimRail Wiki
Revision as of 21:39, 11 March 2023 by Roman (talk | contribs)
Jump to navigation Jump to search

The following article is about the ED 250 / Pendolino electric unit.

ED 250 in Sosnowiec Glowny-Katowice Zawodzie section Author Vítek Scheffczik (Bata)

Unit in reality

On 30 May 2011, the Polish State Railways PKP signed a contract with Alstom for 20 Pendolino ETR 610 trains. These new trains, known as Pendolino ED250, were purchased with the intention of operating them on several major backbone routes, including between Gdynia and Warsaw, on the CMK Central Rail Line high-speed line from Kraków/Katovice to Warsaw and from Wrocław to Warsaw. On 12 August 2013, the first ETR 610 train was delivered.

The high-speed tests with the new train set took place largely on the CMK central railway line; on 16 November, the first day of the tests, the Pendolino reached a speed of 242 km/h. On 17 November 2013, a new Polish Railways speed record was set when the Pendolino ED250 reached a speed of 291 km/h, breaking the previous record of 250.1 km/h (155.4 mph) set 19 years earlier. On 24 November 2013, on the last day of testing on the CMK central railway line, the Pendolino reached a speed of 293 km/h.[1]

Unit in the game

Pendolino - Screenshot by lDestinyl

The unit was first added to the game during the Early Access (EA) release and currently runs Katowice-Warsaw and Warsaw-Cracow (currently the end of the ride is after Tunnel station)'.

Basic parameters of this unit

  • Maximum speed 200Km/h

Serial numbers of unit that can be driven:

  • ED250-018

Cold start procedure

  1. Click on the door and select the option to open the door.
  2. Then enter the unit.
  3. Click the left mouse button and close the door.
  4. On the panel, turn on the batteries, the car lights and select the lights.
  5. Click on the driver's seat, sit behind the console.
  6. Now, activate the cab
  7. Confirm vigilance button
  8. Raise the rear pick-up
  9. Turn on the control circuits
  10. Turn on HV (main switch)
    • Now wait for the panel to read "12A"
    • Confirm to the dispatcher that the train is ready by pressing the ZEW3 button on the radio.
  11. Set the train direction - Forward
  12. Move the brake lever to the "Running" position and wait for the train to unbraking (Brake force must be 0%)
  13. Switch off the spring brake
  14. Now it's time to move. Either use the controller (right) or the Num + key to add power.
    • At the stations we must not forget the possibility of opening the passenger door, which is visible at 04:26
    • Press the open left door button and let the passengers board the train.
    • After the passengers have finished boarding, we press the door lock button and we can leave the station.

Unit faults

The unit is currently free of any malfunctions.

Gallery

Reference

  • [1] - Wikipedia link