Pendolino electric unit

This is the source page. This page is not allowed for translation.

The following article is about the ED 250 / Pendolino electric unit.

ED 250 in Sosnowiec Glowny-Katowice Zawodzie section Author Vítek Scheffczik (Bata)

Unit in reality

On 30 May 2011, the Polish State Railways PKP signed a contract with Alstom for 20 Pendolino ETR 610 trains. These new trains, known as Pendolino ED250, were purchased with the intention of operating them on several major backbone routes, including between Gdynia and Warsaw, on the CMK Central Rail Line high-speed line from Kraków/Katovice to Warsaw and from Wrocław to Warsaw. On 12 August 2013, the first ETR 610 train was delivered.

The high-speed tests with the new train set took place largely on the CMK central railway line; on 16 November, the first day of the tests, the Pendolino reached a speed of 242 km/h. On 17 November 2013, a new Polish Railways speed record was set when the Pendolino ED250 reached a speed of 291 km/h, breaking the previous record of 250.1 km/h (155.4 mph) set 19 years earlier. On 24 November 2013, on the last day of testing on the CMK central railway line, the Pendolino reached a speed of 293 km/h.[1]

Unit parameters

Traction	Electric	Maximum power	5500 kW
Number of engines	4	Maximum speed	250 Km/h (In game vmax 200 Km/h)
Voltage	3 kV DC - 25 kV 15 kV AC	Weight	387 tons

Unit in the game

Pendolino - Screenshot by lDestinyl

The unit was first added to the game during the Early Access (EA) release and currently runs Katowice-Warsaw and Warsaw-Cracow (currently the end of the ride is after Tunnel station)'.

Serial numbers of unit that can be driven:

• ED250-018

Basic parameters of this unit

• Maximum speed 200Km/h

Interior of the locomotive

1.	Battery	16.	n/a
2.	n/a	17.	Bypass MCB
3.	Corridor lighting	18.	Bypass TCO
4.	Reset EVC/TELOC	19.	Disable emergency brake
5.	Bypas harmonic measurements A	20.	Disable radiostop
6.	n/a	21.	Disable SIFA
7.	Bypas harmonic measurements B	22.	Disable NOTHALT
8.	n/a	23.	Disable LZB
9.	Battery powered headlights	24.	Disable PZB
10.	Emergency ventilation	25.	Light mode
11.	Passenger compartment lighting	26.	Light mode rear
12.	Reset computer	27.	Disable EVC
13.	SIFA test	28.	Disable SHP
14.	LV board controls test	29.	Disable MIREL
15.	Brakes test

30.	Radiostop	47.	Cab lighting
31.	Radio power switch	48.	Headlamp top
32.	ZEW buttons	49.	Lights far
33.	Decouple	50.	Light dimming
34.	Horn	51.	Cruise control handle
35.	LZB command	52.	SHP button
36.	Release LZB	53.	Cabin activation
37.	LZB alerter	54.	Open main switch
38.	Sanding	55.	Close main switch
39.	Roller blind	56.	Booster
40.	Control panel lighting	57.	Neutral section
41.	Driver´s spotlight	58.	Pantograph front
42.	Controls test	59.	Pantograph back
43.	Footrest adjustment	60.	Force compressors
44.	Washer	61.	Control circuits
45.	Wiper	62.	Parking
46.	Windscreen heating	63.	Forbid EDB (Electrodynamic braking)

64.	Farlight impulse	76.	Signal lights dimming
65.	Voltage selector	77.	Service brake
66.	Open left doors	78.	Spring brake
67.	Close doors	79.	Bypass emergency brake
68.	Open right doors	80.	Air recirculation
69.	Alarm	81.	Assistatnt spotlight
70.	Coupler cover	82.	AC
71.	Vigilance button	83.	Temperature
72.	Direction control	84.	Fan speed
73.	Drive handle	85.	Emergency brake
74.	Error acknowiedge	86.	Horn (low)
75.	Pulpit lights dimming	87.	Vigilance button

Cold start procedure

1. Click on the door and select the option to open the door.
2. Then enter the unit.
3. Click the left mouse button and close the door.
4. On the panel, turn on the batteries, the car lights and select the lights.
5. Click on the driver's seat, sit behind the console.
6. Now, activate the cab
7. Confirm vigilance button
8. Raise the rear pick-up
9. Turn on the control circuits
10. Turn on HV (main switch)
    • Now wait for the panel to read "12A"
    • Confirm to the dispatcher that the train is ready by pressing the ZEW3 button on the radio.
11. Set the train direction - Forward
12. Move the brake lever to the "Running" position and wait for the train to unbraking (Brake force must be 0%)
13. Switch off the spring brake
14. Now it's time to move. Either use the controller (right) or the Num + key to add power.
    • At the stations we must not forget the possibility of opening the passenger door, which is visible at 04:26
    • Press the open left door button and let the passengers board the train.
    • After the passengers have finished boarding, we press the door lock button and we can leave the station.

Unit faults

The unit is currently free of any malfunctions.

Gallery

• Screenshots from the game (without zoom)
• 

  Pendolino, Author Roman

• 

  Pendolino, Author Zahoracka

• 

  Pendolino, Author Roman

• 

  Pendolino, Author Smokey

• 

  Pendolino, Author Adameqq

Reference

• [1] - Wikipedia link