Translations:DLC CD 163/9/en: Difference between revisions

From SimRail Wiki
Jump to navigation Jump to search
← Older editNewer edit →
VisualWikitext
FuzzyBot (talk | contribs)
2,547 edits
Importing a new version from external source
FuzzyBot (talk | contribs)
2,547 edits
Importing a new version from external source
Line 1: Line 1:
----5. '''Stopping and braking'''
----5. '''Stopping and braking'''
* '''Not an Autopilot:''' It is important to remember that ARR is '''not''' an autopilot designed for stopping at stations.
Before using the automatic train brake, move the Drive Mode switch to the V (Coast) position.

Revision as of 10:21, 18 January 2026

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (DLC CD 163)
==Locomotive Cold start procedure==
1. Switch on the batteries<br>
2. Open the pantograph shut-off valves<br>
3. Activate the cab<br>
4. Switch on the auxiliary compressor (set compressor switch 1 to the PK position)<br>
''Wait for the auxiliary compressor to switch off automatically''<br>
5. Switch on the 115 V central power supply<br>
6. Use the Override Protection button<br>
7. Set the collector grounding switch to the P+Z position if there is no collector malfunction on the locomotive<br>
8. Turn on the main switch (HV)<br>
9. Raise the pantographs<br>
10. Switch on compressor 2<br>
''Wait until the pressure in the main reservoir reaches 5 bar''<br>
11. Switch off the auxiliary compressor and switch on compressor 1 <br>
Wait for the compressors to switch off automatically<br>
12. Turn on the radio<br>
1e. Apply the auxiliary (locomotive) brake<br>
14. Release the train brake and fill the main pipe<br>
15. Release the hand brakes<br>
16. Adjust the lights<br>
17. Set the direction of travel to forward<br>
The locomotive is ready to move.<br>
''Instructions taken from the TSC game and may differ slightly in the game, will be corrected.''<br> 
''Author of instructions: Maty''

5. Stopping and braking

  • Not an Autopilot: It is important to remember that ARR is not an autopilot designed for stopping at stations.

Before using the automatic train brake, move the Drive Mode switch to the V (Coast) position.

Retrieved from "https://wiki.simrail.cz/subdom/wiki/index.php?title=Translations:DLC_CD_163/9/en&oldid=41996"