Translations:Elektrická lokomotiva EU07/12/en: Difference between revisions

From SimRail Wiki
Jump to navigation Jump to search
založena nová stránka s textem „*Alarm/SHP on. Press the vigilance button. If both systems are activated simultaneously, it must be pressed twice. If there is an insufficient response to the visual and audible warning, emergency braking is activated. If the main line pressure has been successfully reduced below 0.35 MPa, you must set the service brake handle to the drive or fill position and hold the release button until the pressure rises to 0.5 MPa.File:Eu07 error1.jpg|thumbnail…“
 
No edit summary
 
Line 1: Line 1:
*Alarm/SHP on. Press the vigilance button. If both systems are activated simultaneously, it must be pressed twice. If there is an insufficient response to the visual and audible warning, emergency braking is activated. If the main line pressure has been successfully reduced below 0.35 MPa, you must set the service brake handle to the drive or fill position and hold the release button until the pressure rises to 0.5 MPa.[[File:Eu07 error1.jpg|thumbnail|EP07 - ignoring SHP|center]]
*Alarm/SHP on. Press the vigilance button. If both systems are activated simultaneously, it must be pressed twice. If there is an insufficient response to the visual and audible warning, emergency braking is activated. If the main line pressure has been successfully reduced below 0.35 MPa, you must set the service brake handle to the drive or fill position and hold the release button until the pressure rises to 0.5 MPa.[[File:Eu07 error1.jpg|náhled|EP07 - ignoring SHP|střed]]

Latest revision as of 01:22, 27 February 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Elektrická lokomotiva EU07)
*Zapnutý alarm/SHP. Stiskněte tlačítko bdělosti. Pokud se aktivují oba systémy současně, je třeba jej stisknout dvakrát. Při nedostatečné reakci na vizuální a zvukovou výstrahu se aktivuje nouzové brzdění. Pokud se podařilo snížit tlak v hlavním potrubí pod 0,35 MPa, musíte nastavit rukojeť provozní brzdy do polohy pro jízdu nebo plnění a držet uvolňovací tlačítko, dokud tlak nestoupne na 0,5 MPa.[[Soubor:Eu07 error1.jpg|náhled|EP07 - ignorování SHP|střed]]
  • Alarm/SHP on. Press the vigilance button. If both systems are activated simultaneously, it must be pressed twice. If there is an insufficient response to the visual and audible warning, emergency braking is activated. If the main line pressure has been successfully reduced below 0.35 MPa, you must set the service brake handle to the drive or fill position and hold the release button until the pressure rises to 0.5 MPa.střed