Electric locomotive ET25: Difference between revisions

From SimRail Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 15: Line 15:
This electric locomotive in the game was added in the EA (Early Access) version, and players can run this locomotive as part of freight trains.  
This electric locomotive in the game was added in the EA (Early Access) version, and players can run this locomotive as part of freight trains.  


<span id="Základní_parametry_této_lokomotivy"></span>
''Serial numbers of locomotives that can be driven:''
===Basic parameters of this locomotive===
* ''EP08-001''<span id="Základní_parametry_této_lokomotivy"></span>


===== Basic parameters of this locomotive =====
*Maximum speed 120 Km/h
*Maximum speed 120 Km/h
*Can be driven up to 40 Km/h on diesel power
*Can be driven up to 40 Km/h on diesel power

Revision as of 21:48, 11 March 2023


The electric locomotive is known as the ET25 Dragon, manufactured in Poland.

E6ACT-008, By Jakub Murat (Muri) - Own work, CC BY-SA 4.0

Locomotive in reality

Newag Dragon is a family of six-axle locomotives manufactured by the Polish manufacturer Newag Gliwice since 2009. Of the modifications offered, only electric DC locomotives are in service in 2015.

The locomotive was created as a joint project of the locomotive repairer Zakłady Naprawcze Lokomotyw Elektrycznych (ZNLE) (later Newag Gliwice) in cooperation with Instytut Elektrotechniki Warszawa and the design office EC Engineering. The locomotive was developed in response to specific Polish conditions, where operators prefer heavy trains, for which a six-axle locomotive is more suitable than the more common four-axle locomotives in Western Europe (e.g. Siemens EuroSprinter or Bombardier TRAXX).[1]

In-game locomotive

Tatar's ET25 screen

This electric locomotive in the game was added in the EA (Early Access) version, and players can run this locomotive as part of freight trains.

Serial numbers of locomotives that can be driven:

  • EP08-001
Basic parameters of this locomotive
  • Maximum speed 120 Km/h
  • Can be driven up to 40 Km/h on diesel power

Cold start procedure

  1. We enter the cabin
  2. Activating the cabin
  3. Press the button to confirm alertness
  4. Raise rear manifold
  5. Turn on the HV switch and hold the button for a moment.
  6. Turn on the radio station
  7. Now, switch off the locomotive handbrake, where the button is located on the rear wall of the cab.
  8. Switch the lights to the forward position.
  9. Set the train's direction of travel - Forward
  10. Switch and hold the brake in the "Reduce braking force" position and wait until the braking force is at 0%.
    • Click ZEW3 button on the radio to confirm the train is ready to the dispatcher.
  11. Now it's time to move. Either use the controller (left) or the Num + key to add power.
  12. Using the Num - key or reducing power on the controller will reduce the locomotive power and then we can brake the train or apply the electrodynamic brake.

Locomotive faults

The locomotive is currently free of any faults.

Gallery

Reference

  • [1] - Wikipedia link