Translations:Elektrická jednotka EN76/10/en

1. Open the battery cover and switch on the batteries, then close the battery cover.
2. Click on the door and enter the unit.
3. Click on the cab door and enter the driver's cab.
4. Click on the driver's seat and sit behind the console.
5. Now activate the cab by switching the button to "cab active on one unit"
6. Confirm the vigilance button.
7. Raise the rear pick-up
   • Wait for the power to come on.
8. Turn on the HV (main power switch) - Hold the button for a few seconds.
9. Wait for the unit to come back to life and the compressors to kick in.
   • Click the ZEW3 button on the radio to confirm the train is ready to the dispatcher.
10. Switch the train lights to the running position
11. Deactivate the train's handbrake.
12. Select the direction of travel of the train - Forward
13. Then release the handbrake by switching to the "Release Brake" position
14. Shift the controller one position forward or press the Num + key
15. Hold down the brake release button, and hold the button until the braking force is at 0%.
16. Now it's time to go. Move the controller forward, or press and hold the Num+ key to start the train.
    • Press the vigilance button to deactivate the SHP
    • Press the Num- key or move the controller back one position, the train will not accelerate but will run without power.
    • Press and hold the Num- key and the unit will start braking using the electrodynamic brake. The longer the key is held, the more the unit brakes.
    • After stopping, release the door lock and select which doors the passengers can open.
    • Or we can open the door ourselves.
    • After all the passengers have boarded, we lock the doors.
    • Use the Num+ key to unblock the train.
    • Press and hold the Num+ key again to add power.